2-4
CONTROLS
COVERS
STARTER KEY
COVERS
The starter key is used to start and stop the
engine, as well as to lock and unlock the
following components:
•Cabdoor
•Enginehood
•Covers
SIDE COVER
Warning
•Stoptheengineandallowthemachine
to cool down before performing
maintenance.
•Besuretosecurethesidecoverwith
the stopper before working inside. Do
not keep the side cover open on a
windy day or if the machine is parked
on a slope.
•Whenopeningandclosingtheside
cover, be careful not to get your hands
or other parts of your body caught by
the cover.
For inspection and maintenance of the
hydraulic oil system, fuel system, coolant
system or window washer, open this cover.
The grease gun and the tools are also stored
in the cover.
1.
Insert the starter key and turn it
counterclockwise to unlock the side cover
(1).
2. Push in the key hole with your thumb and
open the side cover (1) all the way.
Opening
3.
Raise the stopper (2) to secure the cover.
4. Store the tools.
Closing
1. Close the side cover (1) and press it down
until a click is heard.
To Next Page
Loading...
Need help?
General
