Takeuchi TB285 User Manual

2-11
CONTROLS
(E) Adjusting the headrest (Option)
The headrest (E) can be moved upward or
downward.
1. Grab the headrest (E) with both hands,
and move upward or downward to the
desired position.
(F) Adjusting the operating lever stand
SEAT AND SEAT BELT
1. Pull up the lever (5) and slide the lever
stand (seat).
2. Release the lever (5) at the desired angle
to secure the lever stand (seat).
 Adjustmentrange:9positions,in90mm
(3.5 in.)
SEAT BELT
Caution
Be sure to fasten the seat belt securely
before starting the engine.
Fastening the seat belt
1.Adjusttheseattothedesiredpositionfor
operation, sit up and sit back in the chair.
2. Pull the seat belt to the desired length.
3. Make sure that the belt is not twisted and
then insert the tongue plate (A) into the
buckle (B) of the seat belt until you hear a
clicking sound as it locks in place.
4. Check if the belt is securely locked by
pulling it, and arrange the belt around your
waist.
Releasing the seat belt
1. Grasp the tongue plate (A) and press the
button (C) on the buckle (B).
The seat belt retracts back into its original
position.

Takeuchi TB285 Specifications

General

Brand	Takeuchi
Model	TB285
Category	Excavators
Language	English