8-2
OPTIONS
GENERAL PRECAUTIONS
SAFETY PRECAUTIONS
Warning
When removing or installing an
attachment or optional part, take the
following precautions.
•ConsultwithTakeuchibeforeinstalling
an optional attachment.
•Donotuseanyattachmentsnot
approved by Takeuchi. Doing so may
cause safety problems. Or, it may
adversely affect the machine’s operation
or service life.
•Wewillnotbeheldresponsibleforany
injuries, accidents or damage to its
products caused by the use by a non-
approved attachment.
•Selectarm,levelworkarea.Also,be
sure to park in a well ventilated place.
•Clearobstaclesanddangerousobjects,
and clean up spilled fuel immediately.
•Whenhoisting,besuretodesignatea
person to act as a signalman.
Follow the instructions of the signalman
regarding the procedure and measures.
•Whenitisnecessarytotemporally
place a heavy object or an attachment
on the ground during removal or
installation, be sure to place it in a
stable position.
•Keepeveryoneoutoftheareawhen
hoisting. There is a hazard of objects
falling or contacting with people in the
area.
•Useacranetomoveheavyobjects(25
kg (55 lb.) or greater).
•Beforeremovingaheavyobject,besure
to put a support to it. When lifting with a
crane, pay attention to the center of
gravity of the load to keep the machine
in balance.
•Do
notoperatethemachinewhilethe
load is lifted by a crane stand.
GENERAL PRECAUTIONS
•Usetheproperprocedurewhen
mounting a boom or arm; otherwise
serious damage could result. Consult
your sales or service dealer for help.
CAUTIONS WHEN INSTALLING
ATTACHMENTS
Be sure to perform a test operation after an
optional or other special attachment has
been replaced. Inspect the hydraulic oil level
and recharge it as necessary. Consult your
sales or service dealer for detailed
procedures on installing/removing
attachments.
To Next Page
Loading...
Need help?
General
