To Next Page

To Previous Page

Commands listed in alphabetical order

Group

Bus

Syntax

BUS:B<x>:LIN:SOUrce:THResh old <NR3>

BUS:B<x>:LIN:SOUrce:THResh old?

Arguments

<NR3> the LIN source threshold for the speciﬁed bus.

Examples

BUS:B1:LIN:SOUrce:THReshol d 50.0e-3 sets the threshold to 50 mV.

BUS:B1:LIN:SOUrce:THReshol d? might return

:BUS:B1:LIN:SOURCE:THRESHO LD 0.0E+0 indicating t he threshold is 0.0 V.

BUS:B<x>:LIN:STANDard

This command sets or queries the LIN bus standard for the speciﬁed bus. The

bus number is speciﬁed by x.

Conditions

Requires option SR-AUTO.

Group

Bus

Syntax

BUS:B<x>:LIN:STANDard {MIXed|V1X|V2 X}

BUS:B<x>:LIN:STANDard?

Arguments

MIXed speciﬁes both versions 1.x and 2.x of the LIN standard.

V1X spec iﬁes the version 1.x of the LIN standard.

V2X spec iﬁes the version 2.x of the LIN standard.

Examples

BUS:B1:LIN:STANDard V1X sets the standard to version 1.x.

BUS:B1:LIN:STANDard? might return :BUS:B1:LIN:STANDARD V2X,

indicating the standard is set to version 2.x.

BUS:B<x>:MIL1553B:LOWTHRESHold

This command sets or queries the MIL-STD-1553 lower threshold for the

speciﬁed bus. The bus is speciﬁed by x.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-155

Tektronix MSO54 Programmer's Manual

Other manuals for Tektronix MSO54