Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CUR Sor:HBArs:DELTa?
Examples
DISplay:MATHFFTView1:CURSo r:HBArs:DELTa? might return
:DISPLAY:MATHFFTVIEW1:CURS OR:HBARS:DELTA 9.91E+37 indicating the
cursor readout is 9.91E+37.
DISplay:MATHFFTView<x>:CURSor:MODe
This command sets or queries the cursor tracking mode of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CUR Sor:MODe {INDEPENDENT|TRA CK}
Arguments
INDEPENDENT allows independent adjustment of the two cursors.
TRACK ties the navigational functionality of the two cursors together. For cursor 1
adjustments, this ties the movement of the two cursors together; however, cursor 2
continues to move independently of cursor 1.
Examples
DISplay:MATHFFTView1:CURSo r:MODe INDEPENDENT allows independent
adjustment of the two cursors.
DISplay:MATHFFTView1:CURSo r:MODe? might return
:DISPLAY:MATHFFTVIEW1:CURS OR:MODE INDEPENDENT indicating
the mode is set to independent.
DISplay:MATHFFTView<x>:CURSor:ONEOVERDELTATVALUE? (Query Only)
This command queries the one over delta f cursor readout value of the specified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CUR Sor:ONEOVERDELTATVALUE?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-237

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English