Tektronix MSO54 Programmer's Manual

Commands listed in alphabetical order
Examples
DISplay:WAVEV
iew1:ZOOM:ZOOM1:STATe ON
turns the specified zoom on.
DISplay:WAVEView1:ZOOM:ZO OM1:STATe? might return
:DISplay:WAVEView1:ZOOM:Z OOM1:STATe 1, indicating that speci fi ed zoom
is on.
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:VERTical:POSition
This command sets or queries the vertical position of the specified zoom in the
specified waveview. It is freely movable within the confines of the acquired
waveform. It is measured from the top to bottom of the acquisition window.
The top of the zoom window is -5 * vertical zoom factor. The bottom of the
zoom window is +5 * the vertical zoom factor. For a zoom of 5x, the position
ranges from -25 to 25.
NOTE.
WAVEView<x> is the specified waveview and must be WAVEView1 .
ZOOM<x> is the specified zoom and must be ZOOM1 .
Group
Zoom
Syntax
DISplay:WAVEView<x>:ZOOM: ZOOM<x>:VERTical:POSition <NR3>
DISplay:WAVEView<x>:ZOOM: ZOOM<x>:VERTical:POSition?
Arguments
NR3 is the vertical position of the specified zoom in the specified wav
eview. It is
freely movable within the confines of the acquired waveform. The top of the zoom
window is -5 * vertical zoom factor. The bottom of the zoom window is +5 * the
vertical zoom factor. For a vertical zoom of 5x, the position ranges from -25 to 25.
Examples
DISplay:WAVEView1:ZOOM:ZO OM1:VERTical:POSition 50 sets the vertical
position of the specified zoom in the specified waveview to 50, where the vertical
zoom factor is 10x, top of screen is -50 and bottom if +50, and 0 is the vertical
center.
DISplay:WAVEView1:ZOOM:ZO OM1:VERTical:POSition? might return
:DISplay:WAVEView1:ZOOM:Z OOM1:VERTical:POSition 23 .90000,
indicating that the vertical p osition of the specified zoom in the s pecified
waveview is set to 23.9, where the vertical zoom factor is 10x, top of screen is
-50 and bottom if +50, and 0 is the vertical center.
DISplay:WAVEView<x>:ZOOM:ZOOM<x>:VERTical:SCALe
This command sets or queries the vertical zoom factor of the specified zoom in
the specified waveview.
2-314 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English