Commands listed in alphabetical order
MEASUrement:
MEAS<x>:JITTERSummary:TIE
This command sets or queries whether TIE is included in the jitter summary for
the measurement. Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:JITTER Summary:TIE {0|1}
MEASUrement:MEAS<x>:JITTER Summary:TIE?
Arguments
1 add the TIE measurement as part of jitter summary.
0 do not add the TIE measurement as part of jitter summary.
Examples
MEASUrement:MEAS4:JITTERSu mmary:TIE 0 specifies the TIE measurement
is not part of jitter s ummary.
MEASUrement:MEAS4:JITTERSu mmary:TIE? might return
:MEASUREMENT:MEAS4:JITTERS UMMARY:TIE 1 indicating the TIE
measurement is part of jitter summary.
MEASUrement:MEAS<x>:JITTERSummary:TJBER
This command sets or queries whether TJ@BER is included in the jitter summary
for the measurement. Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:JITTER Summary:TJBER {0|1}
MEASUrement:MEAS<x>:JITTER Summary:TJBER?
Arguments
1 add the TJ@BER measurement as part of jitter summary.
0 do not add the TJ@BER measurement as part of jitter summary.
Examples
MEASUrement:MEAS4:JITTERSu mmary:TJBER 0 specifies that the TJ@BER
measurement is not part of jitter summary.
MEASUrement:MEAS4:JITTERSu mmary:TJBER? might return
:MEASUREMENT:MEAS4:JITTERS UMMARY:TJBER 1 indicating the TJ@BER
measurement is part of jitter summary.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-461
To Next Page
Need help?
General
