EasyManuals Logo

Toshiba H9 ASD User Manual

Toshiba H9 ASD
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
H9 ASD Installation and Operation Manual 179
Speed 13 Operation Time
Program Pattern Run Operation Time
This parameter sets the run-time for Preset Speed 13.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F552
Parameter Type — Numerical
Factory Default 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Speed 14 Operation Time
Program Pattern Run Operation Time
This parameter sets the run-time for Preset Speed 14.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F553
Parameter Type — Numerical
Factory Default 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Speed 15 Operation Time
Program Pattern Run Operation Time
This parameter sets the run-time for Preset Speed 15.
This time is effective when used with Group Speeds and non-Group Speeds.
If the Auto-Restart function is activated, the search time required for the Auto-
Restart function will be subtracted from the Operation Time setting; resulting
in a shorter run time.
Direct Access Number — F554
Parameter Type — Numerical
Factory Default 5.0
Changeable During Run — Yes
Minimum — 0.1
Maximum — 6000.0
Units — F520 Setting
Preset Speed Operation Mode
Program Pattern Run Operation Mode
This parameter is used to set the Preset Speed operating mode.
Select Disabled at this parameter to use the speed command only for Preset
Speed operation.
Select Enabled at this parameter to apply the control settings of F561F575 to
the associated Preset Speed while operating in the Preset Speed mode.
Settings:
0 — Disabled (Preset Speed Only)
1 — Enabled (Full Preset Speed Mode)
Direct Access Number — F560
Parameter Type — Selection List
Factory Default Disabled
Changeable During Run — No
F552 F560
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Table of Contents

Other manuals for Toshiba H9 ASD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba H9 ASD and is the answer not in the manual?

Toshiba H9 ASD Specifications

General IconGeneral
BrandToshiba
ModelH9 ASD
CategoryNetwork Card
LanguageEnglish

Related product manuals