Trane IntelliPak I User Manual

106 RT-SVP04F-EN
System Configuration
Software Revision Number: INVALID
Multiple Compressor Module (MCM) 15.00
Used With: Screen always shown on
Ipak II and MCM Installed (DX Cooling)
Possible Values: Software Revision
Number: See note below; MCM (before
the period): 0-255; MCM (after the
period): 00-99
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Note: "INVALID" shown in upper right corner if software version not valid for unit w/IntelliPak II config
jumper (All following version screens).
Software Revision Number: INVALID
GBAS 0-5 VDC Module 5.0
Used With: Screen shown only if GBAS
0-5 VDC Module installed
Possible Values: Software Revision
Number: See note below; Module
(before the period): 0-255; Module
(after the period): 00-99
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number: INVALID
GBAS 0-10 VDC Module 2.00
Used With: Screen shown only if GBAS
0-10 VDC Module installed
Possible Values: Software Revision
Number: See note below; Module
(before the period): 0-255; Module
(after the period): 00-99
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number: INVALID
Ventilation Override (VOM) 3.00
Used With: Screen shown only if VOM
module installed
Possible Values: Software Revision
Number: See note below; VOM (before
the period): 0-255; VOM (after the
period): 00-99
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number: INVALID
Exhaust/Comp Enthalpy Module 11.00
Used With: Screen shown only if
Comparative Enthalpy, Power Exhaust
with Statitrac installed
Possible Values: Software Revision
Number: See note below; Module
(before the period): 0-255; Module
(after the period): 00-99
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
Software Revision Number: INVALID
Heat Module 11.00
Used With: Screen shown only if unit is
not Cooling Only and unit is not
External Heat
Possible Values: Software Revision
Number: See note below; Module
(before the period): 0-255; Module
(after the period): 00-99
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.

Trane IntelliPak I Specifications

General

Brand	Trane
Model	IntelliPak I
Category	Air Conditioner
Language	English