Triumph 1050 Sprint User Manual

114
Maintenance and Adjustment
Unpainted Aluminium Items
Items such as brake and clutch levers must
be correctly cleaned to preserve their
appearance.
Use a proprietary brand of aluminium
cleaner which does not contain abrasive or
caustic elements.
Clean aluminium items regularly, in particular
after use in inclement weather, where the
components must be hand washed and dried
each time the machine is used.
Warranty claims due to inadequate
maintenance will not be allowed.
Cleaning of the Exhaust System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance. These
instructions can be applied to chrome,
brushed stainless steel and carbon fibre
components alike.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Prepare a mixture of cold water and mild
automotive cleaner. Do not use a highly
alkaline soap as commonly found at
commercial car washes because it leaves a
residue.
Wash the exhaust system with a soft cloth. Do
not use an abrasive scouring pad or steel
wool. They will damage the finish.
Rinse the exhaust system thoroughly.
Ensure no soap or water enters the exhausts.
Drying
Dry the exhaust system as far as possible with
a soft cloth. Do not run the engine to dry the
system or spotting will occur.
Protecting
When the exhaust system is dry, rub
'Motorex 645 Clean and Protect' into the
surface.
It is recommended that regular protection be
applied to the system as this will both protect
and enhance the system's appearance.
Caution
The use of products containing silicone will
cause discolouration of the chrome and
must not be used. Similarly, the use of
abrasive cleaners and polishes will damage
the system and must not be used.

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm