Triumph 1050 Sprint User Manual

40
General Information
Seat Care
To prevent damage to the seat or seat cover,
care must be taken not to drop or lean the
seat against any surface which may damage
the seat or seat cover.
Helmet Hooks - Sprint GT
Two helmets can be secured to the
motorcycle using the helmet hooks beneath
the seat.
1. Helmet hooks (right hand shown)
To attach a helmet to the motorcycle, remove
the seat and loop the helmet chin strap over
the hook. To secure the helmet, re-fit the seat
and lock into position.
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop the
seat. Do not lean the seat against the
motorcycle or any surface which may
damage the seat or seat cover. Instead,
place the seat, with the seat cover facing
upwards, on a clean, flat surface which is
covered with a soft cloth.
Do not place any item on the seat which
may cause damage or staining to the seat
cover.
Warning
Never ride the motorcycle with helmet(s)
secured to the helmet hooks. Riding the
motorcycle with helmet(s) secured to the
helmet hooks may cause the motorcycle to
become unstable leading to loss of control
and an accident.
Caution
Do not allow helmets to rest against a hot
silencer. The helmet may be damaged.
1
cgdr

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm