Triumph 1050 Sprint User Manual

38
General Information
Lifting Handle
The lifting handle is located on the left hand
side of the motorcycle, and is the upper edge
of the pillion footrest hanger.
Always use the lifting handle or grab rail to
park the motorcycle on the centre stand.
Tool Kit and Handbook
1. Tool kit/Handbook location (Sprint ST
shown)
The tool kit and handbook are located in a
lockable stowage box on the right hand side
of the motorcycle.
To gain access, insert the ignition key into the
lock and remove the cover.
Note:
• The stowage box is not
waterproof.
Warning
Do not use the side panel or seat as a
hand-hold when placing the motorcycle on
the centre stand as this will cause damage.
ccpm
1

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm