Triumph 1050 Sprint User Manual

28
General Information
Engine Management System
Malfunction Indicator Light
The malfunction indicator light
for the engine management
system illuminates when the
ignition is switched on (to indicate that it is
working) but should not become illuminated
when the engine is running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
Note:
• If the malfunction indicator light
flashes when the ignition is
switched on, contact an authorised
Triumph dealer as soon as possible
to have the situation rectified. In
these circumstances the engine
will not start.
Alarm Indicator Light
The alarm light will illuminate
when the conditions described
in the accessory alarm
instructions are met.
The light does not function unless an alarm is
fitted.
Warning
Reduce speed and do not continue to ride
for longer than is necessary with the
malfunction indicator light illuminated. The
fault may adversely affect engine
performance, exhaust emissions and fuel
consumption. Reduced engine
performance could cause a dangerous
riding condition, leading to loss of control
and an accident. Contact an authorised
Triumph dealer as soon as possible to have
the fault checked and rectified.

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm