Triumph 1050 Sprint User Manual

68
Maintenance and Adjustment
Scheduled Maintenance
To maintain the motorcycle in a safe and
reliable condition, the maintenance and
adjustments outlined in this section must be
carried out as specified in the schedule of
daily checks, and also in line with the
scheduled maintenance chart. The
information that follows describes the
procedures to follow when carrying out the
daily checks and some simple maintenance
and adjustment items.
Triumph Motorcycles cannot accept any
responsibility for damage or injury resulting
from incorrect maintenance or improper
adjustment carried out by the owner.
Warning
Special tools, knowledge and training are
required in order to correctly carry out the
maintenance items listed in the scheduled
maintenance chart. Only an authorised
Triumph dealer will have this knowledge
and equipment.
Since incorrect or neglected maintenance
can lead to a dangerous riding condition,
always have an authorised Triumph dealer
carry out the scheduled maintenance of
this motorcycle.
Warning
All maintenance is vitally important and
must not be neglected. Incorrect
maintenance or adjustment may cause one
or more parts of the motorcycle to
malfunction. A malfunctioning motorcycle
may lead to loss of control and an accident.
Weather, terrain and geographical location
affects maintenance. The maintenance
schedule should be adjusted to match the
particular environment in which the vehicle
is used and the demands of the individual
owner.
Since incorrect or neglected maintenance
can lead to a dangerous riding condition,
always have an authorised Triumph dealer
carry out the scheduled maintenance of
this motorcycle.

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm