Triumph 1050 Sprint User Manual

61
Accessories and Loading
ACCESSORIES AND LOADING
The addition of accessories and carriage of additional weight can affect the motorcycle's
handling characteristics causing changes in stability and necessitating a reduction in speed. The
following information has been prepared as a guide to the potential hazards of adding
accessories to a motorcycle and carrying passengers and additional loads.
Warning
Incorrect loading may result in an unsafe
riding condition leading to an accident.
Always ensure any loads carried are evenly
distributed on both sides of the motorcycle.
Ensure that the load is correctly secured
such that it will not move around while the
motorcycle is in motion.
Always check the load security regularly
(though not while the motorcycle is in
motion) and ensure that the load does not
extend beyond the rear of the motorcycle.
Never exceed the maximum vehicle
loading weight of:
• Sprint ST - 215 kg (473 lbs);
• Sprint GT - 215 kg (473 lbs).
This maximum loading weight is made up
from the combined weight of the rider,
passenger, any accessories fitted and any
load carried.
Warning
Do not install accessories or carry luggage
that impairs the control of the motorcycle.
Make sure that you have not adversely
affected the visibility of any lighting
component, road clearance, banking
capability (i.e. lean angle), control
operation, wheel travel, ABS where fitted,
front fork movement, visibility in any
direction, or any other aspect of the
motorcycle's operation.

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm