Triumph 1050 Sprint User Manual

24
General Information
Trip Computer Reset
1. Trip computer display
2. Scroll button
3. Set button
The following displays on the trip computer
can be reset:
• Average Fuel Consumption
•Journey Distance
•Journey Time
•Average Speed
•Maximum Speed
To reset the trip computer select the desired
display, press the 'scroll' and 'set' buttons
simultaneously for 2 seconds. After
2 seconds, the selected display will reset.
Note:
• Journey distance, journey time
and average speed are reset at the
same time.
Clock Adjustment
1. C l o c k d i s p l a y
2. Hours read-out
3. Minutes read-out
4. Scroll button
5. Set button
To reset the clock, select the clock display and
press both 'scroll' and 'set' buttons together.
Warning
Do not attempt to switch between the trip
computer display modes or reset the trip
computer with the motorcycle in motion as
this may lead to loss of motorcycle control
and an accident.
ccnk
km/h
132
Warning
Do not attempt to adjust the clock with the
motorcycle in motion as this may lead to
loss of motorcycle control and an accident.
ccnh
km/h
2 3
5
14

Triumph 1050 Sprint Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Brakes	Twin 320mm floating discs, 4 piston calipers
Rear Brakes	Single 255mm disc, 2 piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	210 kg
Exhaust	Stainless steel 3 into 1 exhaust system
Ignition	Digital - inductive type
Frame	Aluminum beam perimeter
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload
Rake/Trail	24 degrees
Dimensions	Length: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm