EasyManuals Logo

Triumph 1050 Sprint User Manual

Triumph 1050 Sprint
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
General Information
Filling the Fuel Tank
Avoid filling the tank in rainy or dusty
conditions where airborne material can
contaminate the fuel.
Fill the fuel tank slowly to help prevent
spillage. Do not fill the tank to a level above
the bottom of the filler neck. This will ensure
there is enough air space to allow for fuel
expansion if the fuel inside the tank expands
through absorption of heat from the engine
or from direct sunlight.
1. M a x i m u m f u e l l e v e l
2. Fuel filler neck
3. Air space
After refuelling always check that the fuel
filler cap is correctly closed and locked.
Caution
Contaminated fuel may cause damage to
fuel system components.
1 2 3
cbdf
Warning
Overfilling the tank can lead to fuel
spillage.
If fuel is spilled, thoroughly clean up the
spillage immediately and dispose of the
materials used safely.
Take care not to spill any fuel on the
engine, exhaust pipes, tyres or any other
part of the motorcycle.
Because fuel is highly flammable, any fuel
leak or spillage, or any failure to observe
the safety advice given above may lead to
a fire hazard, which could cause damage to
property and injury or death to persons.
Fuel spilled near to, or onto the tyres will
reduce the tyre's ability to grip the road.
This will result in a dangerous riding
condition potentially causing loss of
motorcycle control and an accident.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph 1050 Sprint and is the answer not in the manual?

Triumph 1050 Sprint Specifications

General IconGeneral
Engine TypeLiquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement1050 cc
Bore x Stroke79 x 71.4 mm
Compression Ratio12.0:1
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveX ring chain
ClutchWet, multi-plate
Gearbox6-speed
Front BrakesTwin 320mm floating discs, 4 piston calipers
Rear BrakesSingle 255mm disc, 2 piston caliper
Front Tire120/70 ZR17
Rear Tire180/55 ZR17
Dry Weight210 kg
ExhaustStainless steel 3 into 1 exhaust system
IgnitionDigital - inductive type
FrameAluminum beam perimeter
Front Suspension43mm
Rear SuspensionMonoshock with adjustable preload
Rake/Trail24 degrees
DimensionsLength: 2, 115 mm, Width: 760 mm, Height: 1, 210 mm

Related product manuals