Upright TM 12 Series User Manual

Pa
g
e 6-9
Illustrated Parts Breakdown - Mast Assembly
505115-000 TM12 PARTS MANUAL
Mast Assembly
505002-000
Item Part Description QTY.
1 505066-000 INNER MOUNT 2
2 505065-000 ANCHOR INNER 2
3 505073-000 STANDPIPE ADAPTER 1
4 505064-000 OUTER ANCHOR 1
5 505063-000 OUTER MOUNT 2
6 505057-000 OUTER AXLE 1
7 505056-000 INNER AXLE 1
8 065491-001 SECOND INNER MAST WEDMENT 4M 1
9 065488-001 LOWER INNER MAST WELDMENT 1
10 065485-004 BASE MAST WELDMENT 1
11 065450-001 CYL. BAR & PAD WELDMENT 1
12 505001-000 CHASSIS ASSY 1
13 505037-000 LIFT CYLINDER ASSY 1
* 505037-010 SEAL KIT, LIFT CYLINDER REF
* 501483-000 EMERGENCY LOWERING VALVE REF
14 SEE NOTE 2 FRONT PAD 12
15 SEE NOTE 2 REAR PAD 12
16 505060-000 PULLEY OUTER 1
17 505059-000 PULLEY INNER 1
18 505054-000 PIN 3
19 505055-000 ANCHOR PIN 2
20 505084-013 HEX HEAD SELF TAPPER (5.5 X 13) 36
21 501253-020 M6 X 20mm SOCKET HEAD CAP SCREW 18
22 505068-000 BEARING, 2220DU 4
23 505067-000 CHAIN LEAF, BL434 (103 LINKS) 4
24 065580-001 PLATFORM WELDMENT REF
25 505072-000 SWITCH, PROXIMITY ASSY 1
26 501253-035 M6 X 35 SOCKET HEAD CAP SCREW 4
27 500532-035 M6 X 30 SOCKET HEAD COUNTERSUNK SCREW 2
28 056060-030 M10 X 30 SCREW (GRADE 12.9) 9
29 056060-025 M10 X 25 SCREW (GRADE 12.9) 2
30 056064-000 M10 NYLOCK NUT 11
31 056060-010 M10 WASHER 11
NOTE 1:
BE GRADE 12.9 BOLTS.
A
B
C
D
IDENTIFICATION DOTS
NOTE 2:
ITEMS 21, 26, 27, 28 & 29 MUST
WEAR PAD SIZES MAY DIFFER FROM ONE MACHINE
TO THE NEXT, WHEN REPLACING FRONT OR REAR
MAST WEAR PADS PLEASE INSPECT THE REMOVED
PADS IN ORDER TO IDENTIFY WHICH REPLACEMENTS
ARE REQUIRED.
(SEE TABLE BELOW AND PICTURE ABOVE RIGHT FOR REFERANCE)
REF PART NUMBER DESCRIPTION TYPE NOTE
A 505061-000 REAR MAST WEAR PAD STANDARD
B 505061-001 REAR MAST WEAR PAD NARROW BLACK IDENTIFICATION DOT
C 505062-000 FRONT MAST WEAR PAD STANDARD
D 505062-001 FRONT MAST WEAR PAD NARROW BLACK IDENTIFICATION DOT

Upright TM 12 Series Specifications

General

Brand	Upright
Model	TM 12 Series
Category	Lifting Systems
Language	English