BA 50Z3/6003 en – Edition 4.3 * 5003b320.fm 3-15
Operation
Check lists
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before the machine can be put into operation.
Start-up checklist
Check the following points before putting the machine into operation:
No.
Question
✔
1
Enough fuel in the tank? (âž 5-3)
2
Coolant level OK? (âž 5-10)
3
Remove water in the diesel fuel prefilter (âž 5-6)
4
Engine oil level OK? (âž 5-7)
5
Oil level in hydraulic tank OK? (âž 5-29)
6
Water level in washer tank OK? (âž 3-36)
7
V-belt condition and tension checked? (âž 5-25)
8
Lubrication points greased? (âž 5-36)
9
Tracks checked for cracks, cuts etc.? (âž 5-33)
10
Lights, signals, indicators, warning lights and indicator lights OK?
(âž 3-30)
11
Dirt (for example mud, snow, ice, etc.) removed from all windows, mirrors,
lights, footholds, drive pedals and control levers?
12
Are all mirrors functional and adjusted correctly?
Are other persons required to guide you?
13
Control lever base folded up? (âž 3-60)
14
Attachment safely locked? (âž 3-103)
15
Engine cover safely locked? (âž 3-63)
16
Especially after cleaning, maintenance or repair work:
➥ Rags, tools and other loose objects removed?
17
Seating position adjusted correctly? (âž 3-37)
18
Seat belt fastened? (âž 3-45)
To Next Page
Loading...
Need help?
General
