Xerox 2515 User Manual

1.4 AC Cooling Fan RAP (2510 W/O
Tag 5)
Note: The fans are turning at a dower speed when
the copier is in the power saver mode than when
the copier
is making copies.
Enter the code
[J ] to switch on the fans.
The
FANS LED on the low voltage power supply is
lit.
Y N
Go to FLAG 1 and check the wire between P6-
10 and P9-7 for an open circuit.
If there
is no open circuit, replace the Control
PWB.
If the problem still exists, replace the LVPS.
Switch off and unplug the copier.
Go to FLAG 2 and check the wiring between the
low voltage power supply and the fans for an open
circuit.
Check the fans for mechanical binding or possible
obstruction; replace as necessary.
Replace the ozone filters
if they are blocked.
PI1 41
XEROGRAPHIC) MODULE
// FANS
LOW VOLTAGE
POWER
SUPPL)
PIJ
5 /
6/93
2510
2-57 1.4 AC Cooling Fen RAP (2510 W/O TAG/ MO~ 5)

Xerox 2515 Specifications

General

Brand	Xerox
Model	2515
Category	Copier
Language	English