EasyManuals Logo
Home>Xerox>All in One Printer>C75

Xerox C75 User Manual

Xerox C75
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
Note
Adjust Fold Position can be accessed from three separate areas in Common Service
Settings (Tools/administrator mode):
Tools > System Settings > Common Service Settings > Paper Tray Settings >
Custom Paper Settings
Tools > System Settings > Common Service Settings > Paper Tray Settings >
Paper Tray Attributes
Tools > System Settings > Common Service Settings > Maintenance > Finisher
Adjustment
1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select one of the following:
Paper Tray Settings > Custom Paper Settings
Paper Tray Settings > Paper Tray Attributes
Maintenance > Finisher Adjustment
6. Select Adjust Fold Position.
7. Select Fold Position Type Setup, and select Change Settings.
8. Select Z Fold-A4 or Z Fold-8.5x11, and select Change Settings.
9. Select Sample Printout.
10. Select the tray in which you loaded paper, and press the Start button.
An output sample is printed.
11. Select Save.
12. Check the output sample, and measure the A and B fold position movement amounts.
13. Enter the measurement value you obtained in the previous step in Values A & B Before
Adjustment, and the final value you want after adjustment in Desired Values A & B.
Tip
Set value A and value B so that an edge of the paper does not extend past a fold
position of the paper. An edge of paper extending past a fold position of the paper
may cause a paper jam.
14. Select Sample Printout again to print an output sample, and check the adjustment
results.
15. Make adjustments again if necessary.
16. Select Save.
17. Select Close until the Adjust Fold Position screen appears.
18. Select the tray in which you loaded paper in step 1, and then press the Start button.
19. Select the adjusted fold position type, and select Save.
20. Continue to select Save or Close until you are returned to the main Tools tab display.
21. Exit administrator mode.
9-39Xerox
®
Color C75 Press
System Administration Guide
Common Service Settings

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox C75 and is the answer not in the manual?

Xerox C75 Specifications

General IconGeneral
BrandXerox
ModelC75
CategoryAll in One Printer
LanguageEnglish

Related product manuals