Xerox C75 User Manual

Remote Authentication Server Settings
This feature sets the remote authentication server; a maximum of five servers can be
set.
Note
This feature does not appear for some models. An optional package is necessary. For
more information, contact our Customer Support Center.
1. Select Connectivity & Network Setup > Remote Authentication Server Settings.
2. Select Remote Authentication Server Settings.
3. Select Authentication System Setup and then Change Settings.
4. Select Authentication System.
5. You can select the system for authentication from Kerberos (Windows2000) or
Kerberos (Solaris), LDAP, SMB, or Authentication Agent.
Kerberos Server Settings
1. Select Kerberos Server Settings.
2. Select a Kerberos Server.
3. Select Change Settings.
4. In Kerberos Server Settings, you can set the following items:
• 1. Primary Server Name/Address
• 2. Primary Server Port Number
• 3. Secondary Server Name/Address
• 4. Secondary Server Port Number
• 5. Domain Name
5. Repeat steps 1 through 4 for any additional servers.
SMB Server Settings
1. Select SMB Server Settings.
2. Select SMB Server Setup.
3. Select By Domain Name or By Domain & Server Names/IP Address and press Save.
4. Select an SMB Server.
5. Select Change Settings.
6. In SMB Server Settings, you can set the Domain Name and the Server Name/IP
Address.
7. Repeat steps 1 - 6 for any additional servers.
Xerox
®
Color C75 Press11-4
System Administration Guide
Connectivity & Network Setup

Xerox C75 Specifications

General

Brand	Xerox
Model	C75
Category	All in One Printer
Language	English