12
Scan Service Settings
This feature allows you to select settings that relate to the scanner feature.
Note
When using CentreWare Internet Services, more detailed settings are possible.
From the System Settings screen, select Scan Service Settings select the item to be set
or changed.
Scan Defaults
In Scan Defaults, you select the default values for the scanner feature. When one of the
following occurs, the machine returns to its preset scan defaults:
• The machine power is switched on,
• The machine returns from a power-saving mode, or
• The Clear All button is pressed.
The settings selected for Scan Defaults are valid after switching off and switching on
the machine’s power.
1. From the Scan Mode Settings screen, select Scan Defaults.
2. Select the item to be set or changed, and select Change Settings.
3. Select the default setting for that item.
4. Select Save; you are returned to the Scan Defaults screen.
5. Select Save; you are returned to the Scan Defaults screen.
6. Upon completion, select Close; you are returned to the Scan Mode Settings screen.
Original Type
Select the default value for Original Type in the Basic Scanning Tab screen. Select one
of the following: Text & Photo, Text, or Photo.
12-1Xerox
®
Color C75 Press
System Administration Guide
To Next Page
Loading...
Need help?
General
