Xerox C75 User Manual

Authentication Using a Card Reader
System
Setting Up Authentication for Xerox Secure Access
Before you begin:
• Enable Secure HTTP (SSL)
• Install the Xerox Secure Access authentication server and configure with user accounts.
Refer to the authentication server documentation for help.
Note
Accounts created on the Xerox Secure Access authentication server must match
accounts stored in the printer’s local database or in another network authentication
server.
• Connect and configure your card reader.
• Install the appropriate plugin for your card reader and printer model. Download the
latest plugin files and plugin installation instructions at www.xerox.com.
1. In CentreWare IS, click Properties > Security > Authentication Configuration.
2. On the Authentication Configuration page, next to Login Type, select Xerox Secure
Access.
3. Select Enabled next to Print Stored File from Folder, or Enabled next to Folder to
PC/Server to enable these services.
4. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
5. Click Apply, then click Reboot Machine.
6. After the printer restarts, refresh your browser and navigate back to the
Authentication Configuration > Step 1of 2 page, and click Next at the bottom of
the page.
7. Next to Authentication System, click Configure.
8. On the Authentication System page select Authentication Agent from the
drop-down list.
9. Type the Server Response Time-Out, and the Search Time-Out.
10. Select Enabled next to Assign UPN (User Principal Name) if desired.
11. Click Apply to accept the changes or Undo to retain the previous settings.
12. Click Reboot Machine.
Configuring Xerox Secure Access Login Settings
1. In CentreWare IS, click Properties > Security > Remote Authentication Servers
Xerox Secure Access Settings.
7-7Xerox
®
Color C75 Press
System Administration Guide
Using the Scan Service

Xerox C75 Specifications

General

Brand	Xerox
Model	C75
Category	All in One Printer
Language	English