For details on the setting items, click Help at the upper right corner of the CentreWare
Internet Services screen.
Configuration of Store to WSD
This section describes how to configure the machine to use the Store to Web Services
for Devices (WSD) feature. WSD provides a way for clients to discover the device and
the services the device offers.
When a device is discovered, a client can retrieve a description of services hosted on that
device and use those services. WSD allows a client to:
• Send messages to and from a web service.
• Dynamically discover a web service.
• Obtain a description of a web service.
• Subscribe to and receive events from a web service.
Preparations
One of the following operating systems must be installed on the destination computer
to use the Store to WSD feature:
• Microsoft Windows 7
• Microsoft Windows Vista Service Pack 2
Enabling the WSD Scan Port
To use the Store to WSD service, enable the WSD scan port.
1. Log on as the System Administrator.
The default user ID is admin. When a passcode is required, the default passcode is
1111.
2. Press the Machine Status button.
3. Select the Tools tab.
4. Select Connectivity and Network Setup.
5. Select Port Settings.
6. Select WSD, and then select Change Settings.
You may need to use the arrow buttons to find WSD on the list.
7. Select WSD Scan - Port Status, and then select Change Settings.
8. Select Enabled, and then select Save.
9. Select Close until the Tools screen displays.
10. Select Close.
7-17Xerox
®
Color C75 Press
System Administration Guide
Using the Scan Service
To Next Page
Loading...
Need help?
General
