Xerox Phaser 6120 Service Manual

Disassembly/Assembly Procedures
Phaser® 6120 Color Laser Printer Service Manual
5-28
Power Supply Cooling Fan Motor (M4)
1. Remove the Right Cover. See Right Cover on page 5-6.
2. Disconnect the connector (PJ4A) [2] from the (PWB-A) Engine Control Board [1].
3. Unlock tabs and remove the Power Supply Cooling Fan Motor [3].
Ventilation Fan Motor (M6)
1. Remove the Right Cover. See Right Cover on page 5-6.
2. Remove the harness from the wiring saddle [3]and disconnect the connector [2] of the
Ventilation Fan Motor [1].
[2]
[1]
4139fs2039c0
[3]
4139fs2040c1
[2]
[3]
[1]
4139fs2041c1

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm