Xerox Phaser 6120 Service Manual

Misfeed/Jam Troubleshooting Procedures
Phaser® 6120 Color Laser Printer Service Manual
4-10
Paper Jam Exit
Detection Timing
Actions
Undefined Jam/Misfeed
Detection Timing
Actions
Type Description
Detection of
misfeed at exit
section
The Exit Sensor (PC7) is not unblocked even after the lapse of a
predetermined period of time after it has been blocked by the paper.
Detection of paper left in
exit section
The Exit Sensor (PC7) is blocked when the Power Switch is turned ON, a
cover is opened and closed, or a misfeed or malfunction is reset.
Relevant Electrical Parts
Exit Sensor (PC7) PWB-A (Engine Control Board)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Initial check items. - -
2 Check the PWB-A connector for proper
connection and correct as necessary.
--
3 PC7 sensor check. PWB-A PJ6A-3 (ON) 2-D
4 SL2 operation check. PWB-A PJ11A-4 (REM) 2-C
5 Change PWB-A. - -
Type Description
Detection of
undefined misfeed
Conflicting settings are made in the printer driver.
Relevant Electrical Parts
Print Control Board (PWB-P) PWB-A (Engine Control Board)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Check printer driver settings. - -
2 Check the PWB-P connector for
proper connection and correct as
necessary.
--

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm