Xerox Phaser 6120 Service Manual

Maintenance Procedures
Phaser® 6120 Color Laser Printer Service Manual
2-11
7. When the Transfer Roller is replaced with a new one, it is necessary to reset the life
counter in the Service menu. For details of how to reset the counter, see Service Menu on
page 3-30.
8. Perform the Density Calibration in the Quality menu. For information about the density
calibration, see DENSITY CALIBRATION on page 3-18.
Reassembly Procedures
1. Align the spring with the post on the plastic housing.
2. Make sure that the drive gear on the transfer roller is aligned with the coupling on the right
side of the printer.
3. Make sure that the spring action of the transfer roller is working correctly.
Caution: Ensure that the High-Voltage Bias Spring is making contact with the Transfer
Roller Bias Contact Plate [1].
transrollspr
[1]

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm