Xerox Phaser 6120 Service Manual

Phaser® 6120 Color Laser Printer Service Manual
3-19
TRANSFER BELT
CONNECTION SETUP
NETWORK SETUP
TCP/IP
DHCP/BOOTP
IP ADDRESS
DEFAULT ROUTER
SUBNET MASK
Function Resets the transfer belt life count.
Use To reset life count.
Setting/procedure After the transfer belt is replaced, select QUALITY MENU→ TRANSFER
BELT → RESET COUNT
Function Sets whether to enable or disable TCP/IP.
Use To disable TCP/IP.
Setting/procedure The default setting is YES.
“YES”, NO
Function Automatically acquires an IP address from the DHCP or BOOTP server, if
there is one in the network, and specifies whether to load other network
information.
Use To automatically acquire an IP address and load other network information.
Setting/procedure The default setting is YES.
“YES”, NO
Function Sets the IP address of the printer on the network.
Use To enter the printer’s IP address.
Setting/procedure Enter the IP address using the up, down, right, and left arrow keys.
The default setting is “192.168.1.2.”
Note: When the printer’s IP address is set manually, DHCP/BOOTP is
automatically set to OFF.
Function Sets the IP address of the router if one is on the network.
Use To enter the IP address of the router.
Setting/procedure Enter the IP address using the up, down, right, and left arrow keys.
The default setting is “192.168.1.2.”
Function Sets the subnet mask of the printer used on the network.
Use To enter the printer subnet mask.
Setting/procedure Enter the subnet mask using the up, down, right, and left arrow keys.
The default setting is “0.0.0.0.”

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm