Phaser® 6120 Color Laser Printer Service Manual
3-27
SAVE CUSTOM
RESTORE CUSTOM
LANGUAGE MENU
ENVIRONMENT MENU
Entering the ENVIRONMENT MENU>
At the top level (Ready status), press the ▲ key for 3 to 4 seconds. Then go into the menu and press the
left arrow key. The ENVIRONMENT MENU appears.
Function Selects whether or not all changed menu settings are saved.
Use To save the custom settings.
Setting/procedure The default setting is NO.
NO/YES
If YES is selected, all changes are saved.
Function Selects whether or not menu items are reverted to the previously saved
settings.
Use To revert the settings to the previously saved settings.
Setting/procedure The default setting is NO.
NO/YES
If YES is selected, the menu items are reverted to the previously saved
settings.
Function Sets the language of the Control Panel display.
Use To change the language of the Control Panel display.
The default setting varies according to the applicable marketing area.
Setting/procedure ENGLISH, FRANCAIS, ESPANOL, PORTUGES, DEUTSCH, ITALIANO,
NEDERLANDS, SVENSKA
ALTITUDE SETUP
Function Optimizes the image by varying the output value of the developing bias when
an image problem occurs due to the atmospheric pressure at high altitudes.
Use To adjust the developing when an image problem (uneven density) occurs in
an environment of low atmospheric pressure in places such as at high
altitudes.