Xerox Phaser 6120 Service Manual

Print Engine Theory of Operation
Phaser® 6120 Color Laser Printer Service Manual
7-47
Fusing Section
Key Name Function/system
[1] Thermistor (TH1) Detects the temperature of the Heating Roller.
[2] Thermostat (TS1) Detects an abnormally high temperature of the Heating Roller.
[3] Exit Sensor (PC7) Detects the paper conveyed from the Fusing Pressure Roller and
Fusing Roller.
[4] Pressure Roller Applies pressure to the toner so that it is fused into the paper.
[5] Heating Roller Applies heat and pressure to the toner so that it is fused into the
paper.
[6] Heater Lamp (H1)
■ Heats the Heating Roller.
■ Heater Lamp power: 760 W
[7] Cleaning Roller Removes paper dust from the Heating Roller.
[8] Fusing Motor (M7) Drives the Heating Roller.
4139to1576c0
4139to1546c0
[1]
[2]
[3]
[4]
[5]
[6]
[7]
4139to1547c0
[8]
4139to1565c0

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm