Xerox Phaser 6120 Service Manual

Overview
Phaser® 6120 Color Laser Printer Service Manual
4-2
Overview
Troubleshooting procedures isolate a problem to a specific component or subassembly. Locate
the Jam or Error Code troubleshooting procedure and follow the steps through completion and
replace any component that fails a troubleshooting “Check Procedure”. If you go through the
procedures and are still unable to solve the problem, re-read the “Theory of Operation” section
for the problem area to understand how that section of the printer functions.
Before Troubleshooting: Advance Checks
Before attempting to solve the customer’s problem, the following advance checks must be
made:
1. Verify that the AC power supply is within proper specifications. See Operating
Environment on page 1-8.
2. Verify that the power cord is free from damage and connected properly.
3. Does the machine share a power supply with any other machine that draws a large current
intermittently (for example, an elevator or air conditioner that generates electrical noise)?
4. Is the installation site level and environmentally appropriate (for example, away from high
temperatures, high humidity, direct sunlight, direct ventilation, etc.?
5. Does the customer file have a problem that may cause a defective image?
6. Are the density control setting in the Quality menu correct?
7. Is the correct media being used for printing?
8. Are the maintenance and supply items correctly installed and not at the end of their useful
life?
9. Is there an adequate supply of toner in the toner cartridges?
10. Is the problem visible on the internal printable pages?
Precautions for Servicing the Printer
1. Unplug the machine’s power cord before starting a service job procedure.
2. If it is necessary to service the machine with the power turned ON, use extreme caution
not to get caught in the cables or drive assemblies of the exposed component.
3. Use special care when handling the Fuser, which can be extremely hot.
Caution: Turn the printer off and wait at least 5 minutes to cool before you attempt to
service the Fuser or adjacent areas.
4. The Developing Unit has a strong magnetic field. Keep watches and measuring
instruments away from it.
5. Take care not to damage the PC Drum in the Imaging Unit.
6. Do not touch any electrical components unless you are instructed to do so by a service
procedure.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm