Xerox Phaser 6120 Service Manual

Print Engine Theory of Operation
Phaser® 6120 Color Laser Printer Service Manual
7-3
Printer Paper Path
Image Creation Process
Key Name Function/System
[1] Printer Image
Processing
The intensity of the laser light is controlled by the image signal sent
from the image processor board.
[2] Laser Exposure The surface of the Photo Conductor is irradiated with the laser light
and an electrostatic latent image is thereby formed.
[3] Photo Conductor The image projected onto the surface of the Photo Conductor and is
converted to a corresponding electrostatic latent image.
[4] Photo Conductor Charging A negative Imaging Unit charge layer is formed on the surface of the
Photo Conductor.
4139to1502c0
[3] Photo
conductor
[4] Photo Conductor Charging
[1] Printer Image Processing
[2] Laser Exposure
[5] Developing
[6] 1st Image Transfer
[7] 2nd Image Transfer
[9] Transfer Belt Cleaning
[10] PC Drum Cleaning
[8] Paper Separation

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm