Xerox Phaser 6120 Service Manual

Print Engine Theory of Operation
Phaser® 6120 Color Laser Printer Service Manual
7-27
Cleaning Blade Pressure/Retraction Mechanism
■ During color printing, an image is formed on the Transfer Belt for each color of toner. The
Cleaning Blade is therefore provided with a pressure/retraction mechanism. that moves the
cleaning blade and applies pressure at the correct time.
■ In monochrome printing, no retraction sequence is carried out.
■ The Cleaning Blade is normally in contact with the Transfer Belt.
Pressure/Retraction Operation
■ The Cleaning Blade pressure/retraction operations are performed by the Main Motor
(M1), Pressure/Retraction Solenoid /Cleaning Blade (SL3), pressure cam, lever, and
Retraction Position Sensor /Cleaning Blade (PC6).
■ When the Pressure/Retraction Solenoid /Cleaning Blade (SL3) is energized, drive from the
Main Motor (M1) is transmitted to the pressure cam.
.
Pressure Cam
Pressure/Retraction Solenoid /Cleaning Blade
Main Motor
Belt Cleaner Assy
Retraction
Position Sensor
/Cleaning Blade
Lever
4139to2075e0

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm