Xerox Phaser 6120 Service Manual

Maintenance Procedures
Phaser® 6120 Color Laser Printer Service Manual
2-15
6. Remove the Transfer Belt. See Transfer Belt on page 2-12.
7. Carefully remove two C-rings [6] of the Top Cover [5] and unhook the two fulcrum pins of
the Top Cover.
Note: When the fulcrum pins of the Top Cover are unhooked, the springs of the Top
Cover can fall off easily.
If the springs are unhooked, make sure to reinstall them in the correct direction. Put the
longer hook on the black plastic piece and the rounded hook on the printer.
[5]
[6]
[5]
4139fs2007c0
4139fs2521c0

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm