1-14 Phaser 7400 Color Printer Service Manual
Electrical Specifications
Physical Dimensions and Clearances
Characteristic Specification
Primary line
voltages
110-127 V Printer - (90 - 135 V) 13 amp circuit
220-240 V Printer - (198 - 254 V) 7-8 amp circuit
Primary line
voltage
frequency range
100-120 V Printer - 50/60 Hz + 2 Hz
220-240 V Printer - 50/60 Hz + 2 Hz
NOTE: Power the printer directly
from the wall outlet. Do not
use “Power Strips” as they
may limit available current.
Power
consumption at
rated voltage
input
Mode
Print Mode
Ready Mode
Sleep Mode
Condition
Maximum
Fuser On
Fuser Off
100/120 VAC
1500 W or less
750 W or less
55 W or less
220/240 VAC
1500 W or less
750 W or less
55 W or less
Print Engine Value
Height:
47.1 cm (18.5 in.)
Width: 64.0 cm (25.2 in.)
Depth:
62.3 cm (24.5 in.)
Weight: 84 kg (185 lb.)
1650-Sheet Feeder Value
Height: 40.1 cm (15.8 in.)
Width: 59.7 cm (23.5 in.)
Depth: 59.9 cm (23.6 in.)
Weight: 53 kg (117 lb.)
550-Sheet Feeder Value
Height: 10.9 cm (4.3 in.)
Width: 59.7 cm (23.5 in.)
Depth: 59.9 cm (23.6 in.)
Weight: 16 kg (36 lb.)
Finisher Value
Height: 101.6 cm (40.0 in.)
Width: 81.3 cm (32.0 in.)
Depth: 59.5 cm (23.6 in.)
Weight: 55 kg (122 lb.)
Surface Value
Tilt tolerance: Within 50 mm side to side.