Xerox Phaser 7400 Service Manual

Theory of Operation 2-41
Imaging Unit Drive
The four Imaging Unit Motors supply the drive to the Imaging Unit drum and
Agitation Bar and Gear as shown in the following figure.
Transfer Unit Motor
The Transfer Unit motor turns clockwise driving the Transfer Unit belt. Inside the
Transfer Unit are four Transfer Rollers located just under each Imaging Unit drum.
When the Transfer Unit Motor and Imaging Unit Motors are activated, they carry the
paper on the transfer belt to the Fuser. The voltages applied to the Transfer Rollers
attract the toner image from the Imaging Unit drum to the media.
Imaging Unit Motor
Imaging Unit Drum
Agitation Gear
Agitation Bar
Imaging Unit
s7400-390

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm