Xerox Phaser 7400 Service Manual

A-28 Phaser 7400 Color Printer Service Manual
Mode Select Port
The Mode Select Port (J390), accessible from the Rear Panel, is a 6-pin port used to
place the printer in one of two operational modes or to reset the Image Processor
Board. To access these modes, turn off the power and connect a jumper between the
pin or pins indicated in the following table and either pin1 or 6. When power is
restored, the printer boots in the selected mode.The Mode Select Port pins are
arranged in numeric order with Pin 1 nearest the power cord connection. Pins 1 and 6
are tied to a common ground with the Rear Panel.
Caution
To reset the Image Processor Board, momentarily ground pin 5, and then
immediately re-open the connection. Grounding pin 5 for more than a few
seconds could damage the processor.
■ Reset is a hardware reset of the Image Processor Board.
■ Customer Mode is the normal mode for printing. The Serial Debug Port is
receiving PostScript back channel information.
■ Service Mode inhibits printing of the Startup page and causes POST to treat all
errors as Hard Faults. See
"Power On Self Test (POST)" on page 4-3. Service
Mode also switches the Serial Debug Port from PostScript back channel
information to the printer’s operating system console.
Mode Select Port Settings
Mode 1 2 3 4 5 6
Printer Reset GND GND GND
Customer
GND GND
Service
GND GND GND GND

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm