Xerox Phaser 7760 Service Manual

January 2010
4-112
Phaser 7760 Color Laser Printer
ADJ 12.4
Revised
Repairs and Adjustments
ADJ 12.4 Booklet Fold Skew
Parts List on PL 21.15, PL 21.17
Purpose
To adjust the Booklet Maker so that the fold is square.
Check
WARNING
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Set up the machine according to instructions in Ta ble 1 and run a set of each Booklet job
in Customer mode. Label each booklet.
2. Measure the skew (A) on all sheets of paper and verify against the Skew Specification
table in Figure 1.
Figure 1 Skew Specification
3. If the fold is within specification on all sheets, go to ADJ 12.5 Booklet Fold Position. If any
of the sheets are out of specification, go to the adjustment.
Adjustment
1. Determine the type of Fold Skew:
a. Set machine up according to instructions in Ta ble 2 (run in Customer mode).
b. Observe the booklet as it comes out on to the Booklet Tray (Figure 2) and determine
the type of skew.
Figure 2 Type of Skew
Table 1 Booklet Jobs
Job #
Select Paper
Supply
Select Booklet Creation Mode
Booklet
Size
1 8.5 x 11 / A4 SEF Booklet Layout, 2 sided originals / Booklet Fold Only 3 sheet
2 11 x 17 / A3 SEF Booklet Layout, 2 sided originals / Booklet Fold Only 3 sheet
Table 2 Booklet Jobs
Job #
Select Paper
Supply
Select Booklet Creation Mode
Booklet
Size
1 11 x 17 / A3 SEF Booklet Layout, 2 sided originals / Booklet Fold Only 3 sheet

Xerox Phaser 7760 Specifications

General

Brand	Xerox
Model	Phaser 7760
Category	Printer
Language	English