January 2010
xi
Phaser 7760 Color Laser Printer
Symbology and Nomenclature
Introduction
Revised
Symbology and Nomenclature
Warnings, Cautions, and Notes
Warnings, Cautions, and Notes will be found throughout the Service Documentation. The
words WARNING or CAUTION may be listed on an illustration when the specific component
associated with the potential hazard is pointed out; however, the message of the WARNING or
CAUTION is always located in the text. The WARNING and CAUTION definitions are as fol-
lows:
WARNING
A Warning is used whenever an operating or maintenance procedure, a practice, condi-
tion, or statement, if not strictly observed, could result in personal injury.
DANGER: Une note Danger est utilisée chaque fois qu'une procédure d'utilisation ou de
maintenance peut être cause de blessure si elle n'est pas strictement respectée.
CAUTION
A Caution is used whenever an operating or maintenance procedure, a practice, condition, or
statement, if not strictly observed, could result in damage to the equipment.
NOTE: A Note is used whenever it is necessary to highlight an operating or maintenance pro-
cedure, practice, condition, or statement.
Specific Warnings
The following sections have additional specific warning information.
Machine Safety Icons
The following reference symbols are used throughout the documentation.
Machine Safety Icons
This symbol indicates Laser Hazard.
Figure 1 Laser Hazard Symbol
This symbol indicates DANGER high voltage.
Figure 2 DANGER High Voltage Symbol
These symbols indicate hot surface on or in the printer. Use caution to avoid personal injury.
Figure 3 Hot Surface on or in the Printer Symbol
Figure 4 Hot Surface Symbol
Table 1 Introduction and Section 4
Introduction - Symbology and Nomenclature
Section 4 - Repairs and Adjustments
Table 2 Section 2 and Section 6
Section 4 - REP 10.2, Fuser Fan
Section 6 - Developer BIAS
To Next Page
Loading...
Need help?
General