Safety and Regulations WorkCentre
®
5945/5955
18 User Guide
Before installing this device, users must make sure that it is permissible to be connected to the
facilities of the local telecommunications company. The device must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the
supplier. Any repairs or alterations made by the user to this device, or device malfunctions, may give
the telecommunications company cause to request the user to disconnect the device.
Users should make sure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe systems, if present, are connected together.
This precaution may be particularly important in rural areas.
!
Caution
Users should not attempt to make such connections themselves, but should contact the appropri-
ate electric inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of
the maximum number of terminals allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalent Numbers of all of the devices does not exceed
5. For the Canadian REN value, please see the label on the device.
Canada CS-03 issue 9:
This product has been tested to and is compliant with CS-03 issue 9.
Europe
Radio Equipment & Telecommunications Terminal Equipment Directive
This Xerox product has been self-certified by Xerox for pan-European single terminal connection to
the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC.
The product has been designed to work with the national PSTNs and compatible PBXs of the
fo l lo wing cou ntr i es: A u s t r i a , B e l g i u m , B u l g a r i a , C y p r u s , C z e c h R e p u b l i c , D e n m a r k , E s t o n i a ,
Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United
Kingdom, Iceland, Liechtenstein, Norway.
In the event of problems, you should contact your local Xerox representative in the first
instance.This product has been tested to and is compliant with TBR21 OR ES 103 021-1/2/3 or ES
203 021-1/2/3, technical specifications for terminal equipment for use on analogue-switched
telephone networks in the European Economic Area.The product may be configured to be
compatible with other country networks.Please contact your Xerox representative if it needs to be
reconnected to another country's network.
Note: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling it is
recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call
setup. Modification, connection to external control software or to external controlapparatus not
authorized by Xerox, will invalidate its certification.
To Next Page
Loading...
Need help?
General
