Getting Started WorkCentre
®
5945/5955
34 User Guide
More Information
Using the Energy Saver Option
Using the Energy Saver Option
Energy Saver ends the current session and keeps the device running on low power. When in Energy
Saver Mode, press the Power button to wake up the device.
1. Press the Power button on the control panel.
2. Select the Energy Saver button on the touch screen.
3. Select the Energy Saver button again to confirm that the device should go into the Energy
Saver state.
Note: When Energy Saver mode is confirmed the device will immediately enter Low Power
mode. If Sleep mode has been configured, the device will then enter Sleep mode after a
specified period of time.
Note: The Power button is illuminated when the device is in the Energy Saver state. A steady
light indicates the device is in Low Power mode. A flashing light indicates the device is in Sleep
mode.
4. To re-activate the device when in Low Power or Sleep mode, press the Power button. The device
takes longer to recover from Sleep mode.
Note: If there are any pages in the document feeder input tray when the device powers on or exits
power save mode you will be prompted to reload the documents.
More Information
Powering the Device Off
To Next Page
Loading...
Need help?
General
