EasyManuals Logo
Home>Xerox>All in One Printer>WORKCENTRE PE 220

Xerox WORKCENTRE PE 220 User Manual

Xerox WORKCENTRE PE 220
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Status Indicator RAPs
2-26 11/05 Workcentre PE 220
18 Print Cartridge Problems RAP
This section explains messages on the LCD that are related to the data stored in the EEPROM in
the print cartridge.
Toner Low
- Explanation: The amount of toner remaining is less than 10%. The print cartridge is almost
empty or at end of life.
- Solution: Replace the print cartridge, PL 1.
Toner Empty
- Explanation: The print cartridge is empty
- Solution: Replace the print cartridge, PL 1.
Drum Warning
- Explanation: This message appears when the OPC drum is nearing the end of its life
(14,000 pages). This means that the life of the mechanical parts in the print cartridge has
expired (this is not an indication of toner remaining).
- Solution: After printing about 15,000 pages, in a worst case scenario, the waste toner collec-
tor might overflow and it may cause the system to fail. Also after 15,000 pages the OPC drum
surface will be becoming worn and print quality will degrade, print images will become misty.
It is therefore necessary to replace the print cartridge even though there may be toner left in
it. When this message occurs there are approximately 1,000 pages left.
Replace Drum
- Explanation: The print cartridge mechanical life is expired.
- Solution: Replace the print cartridge, PL 1.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WORKCENTRE PE 220 and is the answer not in the manual?

Xerox WORKCENTRE PE 220 Specifications

General IconGeneral
BrandXerox
ModelWORKCENTRE PE 220
CategoryAll in One Printer
LanguageEnglish

Related product manuals