Xerox WORKCENTRE PE 220 User Manual

Image Quality
3-14 11/05 Workcentre PE 220
IQ 15 Blank Page Print out (1)
Description
Blank page is printed.
IQ 16 Blank Page Print out (2)
Description
Blank page is printed.
One or several blank pages are printed.
When the machine turns on, several blank pages print.
Check and Cause Solution
1. Bad ground contacts in OPC
and/or developer.
1. Remove contamination from the
terminals of the developer and the
OPC unit.
2. Check the Scanner Cover is
properly closed.
2. Room light can pass through a
thin original.
3. Check shading profile. 3. Redo shading profile in the tech
mode, refer to GP 4
.
4. Check white/black reference volt-
age on Main PBA.
4. Replace the Main PBA, PL 1
.
Check and Cause Solution
1. Bad ground contacts in OPC
and/or developer.
1. Remove contamination from the
terminals of the developer.
2. Abnormal solenoid. 2. Perform the engine self test
using Engine Test Mode to check
the Solenoid, GP 7
.
3. Turn the power off, then on.
Resend the job.
4. Install a new Main PBA, PL 1
.

Xerox WORKCENTRE PE 220 Specifications

General

Brand	Xerox
Model	WORKCENTRE PE 220
Category	All in One Printer
Language	English