VB3/ V5 / VB 5 series inverter
—— Essential
Essential
Essential
Essential introduction
introduction
introduction
introduction about
about
about
about product
product
product
product operation
operation
operation
operation
Safety
Safety
Safety
Safety Precautions
Precautions
Precautions
Precautions
Upon unpacking, please confirm that: Check whether the model and the rated values on the nameplate of the inverter are in
accordance with your order. Check if there is any damage occurred during transportation; p leases contact us or the
distributor if you find any missing or damage of the products.
In order to use this product correctly, the user who uses the product for the first time must read this manual carefully and
pay close attention to the safety precautions.
Please keep this manual properly, hand it to the terminal user and
lay
it on the place where the operators can read it easily.
Confirmations
Confirmations
Confirmations
Confirmations Upon
Upon
Upon
Upon Delivery
Delivery
Delivery
Delivery
Installation
Installation
Installation
Installation
Wiring
Wiring
Wiring
Wiring
Never install an inverter that is damaged or missing components. Doing so can result in injury.
Always hold the bottom of the inverter when carrying it. If the inverter
is
held by the front cover, the main body
of the inverter may fall, possible resulting in injury.
Attach the inverter to metal or other noncombustible materials. Fire can result if the inverter
is
attached to a
combustible material.
Install a cooling fan or other cooling device when installing more than one inverter in the same enclosure so that
the temperature of the air entering the inverters
is
below 45 ℃ . Overheating can result in fires or other accidents.
Always turn off the input power supply before wiring . Otherwise, an electric shock or fire may occur.
Wiring must be operated by an authorized person qualified in electrical work. Otherwise, an electric shock or
fire may occur.
Make sure to ground the ground terminals. Otherwise, an electric shock or fire may occur.
Always check the operation of any emergency stop circuits after they are wired. Otherwise, possibly result in
injury ( user respon sib ility for the wiring ) .
Never touch the output terminal directly by your hands or let the output terminals to come into contact with the
inverter case. Never short the output terminals. Otherwise, an electric short or ground short may occur.
6. Never touch the internal circuit or the zero- component until power off and the charge indicator
is
off
as
there may still be high voltage inside the A C motor dirver.
◎ Safty
Safty
Safty
Safty Precautions
Precautions
Precautions
Precautions ◎
To Next Page
Loading...
Need help?
General
