Network Communications
6
6.2 Field Bus Network Support
YASKAWA SIEPC71061753C GA500 Technical Manual 217
6.2 Field Bus Network Support
You can use the PLC to control and monitor the drive through the network. The drive has a standard RS-485
interface (MEMOBUS/Modbus communications). Install a separately sold communication option on the drive to
support other network communications.
◆ Available Communication Options
Refer to Table 6.1 for the fieldbus networks that are compatible with the drive. Contact Yaskawa or your nearest
sales representative to order a communication option.
Table 6.1 Available Fieldbus Network
Type of Communications Option model
CC-Link SI-C3
MECHATROLINK-II SI-T3
MECHATROLINK-III SI-ET3
PROFIBUS-DP SI-P3
CANopen SI-S3
EtherCAT SI-ES3
Type of Communications Option model
DeviceNet SI-N3
Modbus TCP/IP SI-EM3
PROFINET SI-EP3
EtherNet/IP SI-EN3
Powerlink SI-EL3
To Next Page
Loading...
Need help?
General
