Administrator’s Guide for SIP-T2xP IP Phones
92
To configure the level of the log files via web user interface:
1. Click on Upgrade->Advanced.
2. Select the desired level from the pull-down list of Log Level.
3. Click Confirm to accept the change.
The web user interface prompts ―It will take effect after reboot, reboot now?‖.
4. Click OK to reboot the phone.
To export log files to a syslog server via web user interface:
1.
Click on Upgrade->Advanced.
2.
Select Server from the pull-down list of Export System Log.
3.
Enter the address of the syslog server.
4.
Click Confirm to save the change.
To export log files to the local system via web user interface:
1.
Click on Upgrade->Advanced.
2.
Select Local from the pull-down list of Export System Log.
3.
Click Export to open file download window, and then save the file to your local
system.
The following figure shows a portion of a log file:
You can capture packets in two ways: capturing the packets via web user interface or
To Next Page
Loading...
Need help?
General