Yealink SIP-T2XP Administration Guide

Configuring Advanced Features
63
Local
Web User Interface
Configure the action URL on the
IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=41
Opposite to Action URL, Action URI allows the IP phone to interact with web server
application by receiving and handling HTTP GET requests. When receiving a URI, the IP
phone will perform the specified action and response a 200 OK message. The HTTP GET
request may contain variable name ―key‖ and variable value, which is separated by
―=‖. The URI format is: http://IP address ofphone/cgi-bin/ConfigManApp.com?key=
variable value (e.g. http://192.168.1.5/cgi-bin/ConfigManApp.com?key=MUTE). Entering
the URI in the web browser triggers the IP phone to perform the predefined event (e.g.
mute the call).
The following table lists the variable values may be used when specifying the URI:
Variable
Phone Action
key=OK/key=ENTER
Press the OK key or the Enter soft key.
key=SPEAKER
Press the Speaker key.
key=F_TRANSFER
Press the Transfer key.
key=VOLUME_UP
Increase the volume.
key=VOLUME_DOWN
Decrease the volume.
key=MUTE
Mute the call.
key=F_HOLD
Press the Hold key.
key=X
Press the X key.
key=0-9/*/POUND
Send the DTMF digit (0-9, * or #).
key=L1-L6
Press the Line key.
key=D1-D10
Press the DSS key.
key=F_CONFERENCE
Press the Conference key.
key=F1-F4
Press the Soft key.
key=MSG
Press the MESSAGE key.
key=HEADSET
Press the HEADSET key.
key=RD
Press the Redial key.
key=UP/DOWN/LEFT/RIGHT
Press the Navigation keys.

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English