Yealink SIP-T2XP Administration Guide

Configuring Basic Features
39
feature in phone mode.
For more information, refer to
Call Forward on page 119.
Configure the call forward
feature in custom mode.
For more information, refer to
Call Forward on page 123.
Local
Web User Interface
Configure the call forward
feature.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=6
For more information, refer to
SIP-T2xP User Guide.
Phone User Interface
Configure the call forward
feature.
For more information, refer to
SIP-T2xP User Guide.
The call transfer feature allows user to transfer an existing call to another party. The IP
phone offers three types of transfer:
 Blind Transfer -- Transfer a call directly to another party without consulting.
 Semi-attended Transfer -- Transfer a call after hearing the ring-back tone.
 Attended Transfer -- Transfer a call with prior consulting.
Normally, the transfer is completed by pressing the Transfer key. You can configure the IP
phone to complete the blind transfer and attended transfer through on-hook. This
feature is enabled by default.
When performing the semi-attended transfer, you can configure the phone whether to
display the prompt ―1 New Missed Call(s)‖ on the LCD screen of the destination party’s
phone. This feature is disabled by default.
Procedure
Call transfer can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the phone to complete
the blind or attended transfer
through on-hook.
Configure the semi-attended

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English