Administrator’s Guide for SIP-T2xP IP Phones
22
"12x" would match "121", "122", "123", "12a", etc.
Numeric ranges are allowed within the brackets: Digit ―-‖ Digit.
Example:
―[5-7]‖ would match the number‖5‖, ‖6‖or ‖7‖.
The square bracket "[]" can be used as a placeholder for a single
character which matches any of a set of characters. Example:
"91[5-7]1234" would match "9151234", "9161234", "9171234", etc.
The parenthesis "( )" can be used to group together patterns, for
instance, to logically combine two or more patterns. Example:
"([1-9])([2-7])3" would match "923", "153", "673", etc.
The ―$‖ followed by the sequence number of a parenthesis means
the characters placed in the parenthesis. The sequence number
stands for the corresponding parenthesis. Example:
A replace rule configuration, Prefix: "9([5-7]) (.)", Replace: "5$2". When
you dial out "96123" on your phone, the phone will replace the
number as "5123" and then dial out. ―$2‖ means the characters in the
second parenthesis, that is, ―123‖.
Replace rule is an alternated string of characters that replaces the numbers dialed by
the user. You can specify at most 20 replace rules for the IP phone. You can create
multiple replace rules using a replace rule template and specify which phones are to
use the replace rules. For more information on the replace rule template, refer to
Replace Rule Template on page 83.
Procedure
Replace rule can be created using the configuration files or locally.
Create the replace rule for the
phone.
For more information, refer to Dial
Plan on page 103.
Create the replace rule for the
phone.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
ConfigManApp.com?Id=12
For more information, refer to the
SIP-T2xP User Guide.
To Next Page
Loading...
Need help?
General